Alanqa Solutions is a trusted supplier of Nyco hydraulic fluids, including Hydraunycoil and Turbonycoil, delivering high-performance solutions for aviation and aerospace applications.
Hydraunycoil FH 19
HYDRAUNYCOIL FH 19 is a petroleum-based hydraulic fluid with a viscosity of 25 cSt at 40°C and a viscosity index exceeding 350. Hydraunycoil FH 19 is mostly considered for use on ordnance equipment such as recoil systems and hydraulic systems for rotating weapon or aiming devices on Navy vessels.
Hydraunycoil FH 14
HYDRAUNYCOIL FH 14 is a mineral hydraulic fluid with a viscosity of 40 cSt at 40°C. It exhibits good anti-rust as well as anti-wear properties. Approvals TL 9150-0035 Issue 7 NATO CODE H-540
Hydraunycoil FH 2
HYDRAUNYCOIL FH 2 is a synthetic hydraulic fluid based on a blend of PAO and diesters, with a viscosity of 15 cSt at 40°C and a viscosity index of 125. HYDRAUNYCOIL FH 2 primarily contains anti-corrosion and anti-wear additives. It is supplied with a controlled particulate contamination level. Operating temperature range of HYDRAUNYCOIL FH2 is -40°C to +160°C in continuous use.
Hydraunycoil FH 51
HYDRAUNYCOIL FH 51 is a mineral hydraulic fluid having a viscosity of 14 cSt at 40°C, contains good anti-corrosion and anti-wear additives. It can be used on a wide operating temperature range, from -54°C to +135°C in air-tight circuits and -54°C to +90°C in open circuits. HYDRAUNYCOIL FH 51 provide a viscosity index exceeding 300. It is supplied with a controlled level of contaminant.
HYDRAUNYCOIL FH 6AW
HYDRAUNYCOIL FH 6 AW is a mineral-based shock strut fluid, primarily designed for use in aircraft landing gears and other hydraulic systems. It have wide operating temperature range (from -54°C to +135°C) and its improved lubricity and extreme-pressure properties. It is used in aircraft like Boeing and Airbus models, and is also used in other applications such as military and industrial equipment.
Hydraunycoil FH 42
Hydraunycoil FH 42 is a synthetic hydraulic fluid based on PAO and esters with a viscosity of 7 cSt at 40°C. It is formulated to operate in the temperature range - 54°C to + 200°C for a long period of time without notable evaporation or change in viscosity. Hydraunycoil FH 42 is the latest generation of hydraulic fluids for aircraft (A380) and missiles.
Hydraunycoil FH 5AW
Hydraunycoil FH 5 AW is a petroleum-based fluid with a viscosity of 14 cst at 40°C. It have a specific additive package to improve the fluid lubricity and extreme-pressure properties. As it retains fluidity down to - 54°C, it is an efficient shock absorber during landing, even after prolonged high altitude cruise.
Turbonycoil 160
Turbonycoil 160 is a 3 cSt oil at 100°C and is made of neopolyol esters containing additives to improve its anti-oxidant, anticorrosion and extreme-pressure properties. It is designed to withstand the high temperature experienced by the military engines of combat jet aircraft and retain fluidity at very low temperature (operation down to - 54°C).
Turbonycoil 3516
Turbonycoil 3516 is a mineral turbine oil combined from mineral naphthenic base stocks and anti-oxidant additives with a viscosity of 3 cSt at 100°C. It retains a low viscosity at very low temperature, down to -60°C.
Turbonycoil 3560
Turbonycoil 3560 SAE 50 is a non-dispersive petroleum lubricating oil with a viscosity of 19 cSt at 100°C. Turbonycoil 3560 SAE 50 is formulated from blends of selected petroleum base stocks and have a pour point depressant additive to improve low temperature properties. Turbonycoil 3560 SAE 50 meets with SAE J1966 Grade 50 requirements, as well as military specification MIL-L-6082 E grade 1100 and AIR 3560/D grade 100, (obsolete).
Turbonycoil 3570
• Turbonycoil 3570 Gr. 15W50 is a semi-synthetic dispersive lubricating oil with a 20 mm²/s viscosity at 100°C. Turbonycoil 3570 Gr. 15W50 is devloped from selected mineral and synthetic base stocks blended with additives to provide low temperature fluidity, engine cleanliness and protection against wear. Turbonycoil 3570 Gr. 15W50 is a semi-synthetic dispersive lubricating oil with a 20 mm²/s viscosity at 100°C.
Turbonycoil 600
URBONYCOIL 600 is a lubricating oil with a viscosity of 5 cSt at 100°C. It is formulated on high thermal stable neopentyl polyol esters, having carefully selected anti-oxidant, anti-wear and anti-corrosion additives. Based on 40+ years of experience in jet engines of military and commercial aircraft, TURBONYCOIL 600 is also used on aeroderivative gas turbines and accessory equipments such as APUs (Auxiliary Power Units), IDGs (Integrated Drive Generators), starters, etc.
Turbonycoil 640
TURBONYCOIL 640 is a lubricating oil with a viscosity of 5 cSt at 100°C. It is devloped on neopentyl polyol esters with high thermal stability, having carefully selected anti-oxidant, anti-wear and anti-corrosion additives. TURBONYCOIL 640 is a turbine oil mostly designed for the hotest gas turbines engines in military, commercial aircraft and helicopters, as well as aeroderivative gas turbines.
Nycolube 160
NYCOLUBE 160, also known as Turbonycoil 160, is a synthetic aviation turbine oil devloped for military jet engines and other applications requiring low-temperature performance. It's widely known for its ability to withstand high temperatures and maintain fluidity even at very low temperatures (-54°C).
Nycolube 600
TURBONYCOIL 600 is a lubricating oil with a viscosity of 5 cSt at 100°C. It is devloped on high thermal stable neopentyl polyol esters, fortified with carefully selected antioxidant, anti-wear and anti-corrosion additives.
Nycolube 3516
NYCOLUBE 3516 is a mineral turbine oil designed for aircraft applications, particularly for turbines, accessories like APUs and starters, and IDGs. It's known for its low viscosity retention at very low temperatures, down to -60°C. The oil is formulated from mineral naphthenic base stocks and anti-oxidant additives.
Nycolube 64
NYCOLUBE 64 is a high-performance mineral gear oil, specifically devloped for use in helicopter transmissions and other demanding applications, particularly in cold climates. It's known for its extreme-pressure additives and meets with various military and aviation standards, including MIL-PRF-6086 Grade L and NATO Code O-153.
Nycolube 11B
Nycolube 11B is a synthetic lubricating oil with a viscosity of 13 cSt at 40°C, based on neopolyol esters. It is inhibited against oxidation and corrosion.
Nycolybe 7870
Nycolube 7870 is a high-performance mineral lubricating oil specifically devloped for the aviation industry. With a viscosity of 10 cSt at 40°C, it offers superior lubrication properties while being highly resistant to corrosion and oxidation. This makes it an perfect choice for critical applications in both military and civil aircrafts and helicopters.
Nycolube 3525
Nycolube 3525 is a petroleum oil with a viscosity of 9 cSt at 100°C and contains high performance extreme-pressure additives.
Nycoprotec 03
NYCOPROTEC 03 is intended to be diluted in petroleum piston engine oil or petroleum turbine engine oil. The typical rate is 3 parts of engine oil and 1 part of NYCOPROTEC 03 by volume. It may also be used at a different treat-rate in various petroleum oils to impart to them good anti-corrosion properties.
Nycoprotec 04
NYCOPROTEC 04 is a petroleum oil used for corrosion prevention and lubrication, mostly in aircraft applications. It's a mineral turbine oil fortified with a corrosion-inhibiting additive package and has a viscosity of 25 cSt at 40°C. It's used for storing aircraft components, lubricating pins, locks, and other moving surfaces.
Nycoprotec 05
NYCOPROTEC 05 is a mineral corrosion preventive oil used for storing aircraft components and parts to prevent corrosion. It's based on a mineral piston engine oil and fortified with a corrosion-inhibiting additive package.
Nycoprotec 06
NYCOPROTEC 06 is a mineral oil having a technical additive concentrate containing corrosion inhibitors and blended to neutralize the corrosion effect of the products of combustion of leaded gasoline.
Nycoprotec 12
Nycoprotec 12 is formulated for use in applications where equipment and components need to be protected from corrosion, especially during storage or extended downtime.
Nyco Grease GN 05
Nyco Grease GN 05 is an NLGI 2 grease based on a high-viscosity mineral oil, thickened by clay. It has good resistance to water washout and excellent load-carrying capacity.
Nyco Grease GN 06
Nyco Grease GN 06 is a mineral oil-based grease with a viscosity of 5 cSt at 100°C. It is resistant to wear, corrosion and oxidation.
Nyco Grease GN 07
Nyco Grease GN 07 is a clay-thickened grease with a viscosity of 5 cSt at 100°C.
Nyco Grease GN 148
Nyco Grease GN 148 is an NLGI 2 grease with excellent anti-rust properties.
Nyco Grease GN 15
Nyco Grease GN 15 is a lithium grease formulated on a mineral oil with a viscosity of 5 cSt at 100°C. It is inhibited against corrosion and oxidation and has good water resistance. Nyco Grease GN 15 can be used from -40°C to +121°C.
Nyco Grease GN 17
Nyco Grease GN 17 is a soft NGLI 2 grease. It is fortified with anti-corrosive, antioxidant and anti-wear additives.
Nyco Grease GN 22
Nyco Grease GN 22 is a non-soap thickened grease. It is resistant to corrosion and oxidation.
Nyco Grease GN 27
Nyco Grease GN 10 is a soft NGLI 2 grease. It is fortified with anti-corrosive, antioxidant and anti-wear additives.
Nyco Grease GN 3058
Nyco Grease GN 3058 is a synthetic grease. It boasts high load-carrying capability and offers good corrosion resistance, even in salt water.
Nyco Grease GN GA 47
Nyco Grease GN 47 is an anti-seize compound.
Nyco Grease GN 10
Nyco Grease GN 10 is a soft NGLI 2 grease. It is fortified with anti-corrosive, antioxidant and anti-wear additives.
Nyco Grease GN 22
Nyco Grease GN 22 is a non-soap thickened grease. It is resistant to corrosion and oxidation.
Nyco Grease GN 46
Nyco Grease GN 06 is a mineral oil-based grease with a viscosity of 5 cSt at 100°C. It is resistant to wear, corrosion and oxidation.
Nyco Grease GN 4343
Nyco Grease GN 4343 is an NGLI 2 grease for aircraft pneumatic systems.